Canon PowerShot G6 User Manual page 175

List of Error/Message
0
es
The following error and message codes may appear on the display
panel.
Error Codes
Exx
(XX: number)
The camera has experienced a problem. Turn off the
power, wait a second, and then try shooting or playing
back. If the error code appears repeatedly, there is a
problem. Note the error code number and take the camera
in for servicing. If an error code appears immediately after
a
shot, there is a chance that the image was not recorded.
Check the image in playback made.
Message Codes
Ph
Playing back image.
PC
Connected to computer in PC connection mode.
Adequate battery charge.
~
Lb
CF
LEns
Inl=
Low battery charge. Charge the battery as soon as possible to
use for any length of time.
Battery charge low, camera will not operate. Immediately
recharge or replace the battery pack with a charged one.
No CF card in camera, CF card/battery cover is open, or CF card
error.
Power turned on while holding the lens. Turn power off and on
again.
Intervalometer is set (shoots images automatically at set time
intervals). (The number of remaining shots display after the first
images is shot.)
167
•
r
§:
s,
~
CD
en
en
OJ
en
CD
en