Maintenance, Care & Cleaning (cont.)
Fig. 1.
Front louver grill screw locations.
Fig. 3.
Verify all blockages have been removed.
Fig. 5.
Carefully slide the condensing unit out.
TEC_TM_159 | REV. A | EN
Chef Base Series
Fig. 2.
Never brush across coil fins.
Fig. 4.
Condenser base bolt locations.
Fig. 6.
Carefully slide the condensing unit back into position and reinstall the bolts.
07/6/2022
www.truemfg.com
Page 15 of 19