Getting Started
3. Disconnect the power cord from the power outlet and the
computer, and disconnect any external devices.
4. Position the computer on its side with the rubber pads on the
bottom. (If the computer is being used in the tower
configuration, remove the computer from the stand.)
5. Loosen the thumbscrew on the rear of the computer, slide the
access panel toward the rear of the computer, then lift it off.
6. Rotate the catch toward the right side of the computer until it
is disengaged.
Releasing the MultiBay Security Catch
7. Replace the access panel.
8. Replace the stand, if desired.
12
www.hp.com
Getting Started