Advertisement
Push the Power switch(button) off/on the set(the remote control)
to turn the set off/on.
It can be made Hotel mode.
3. Exit command
- First, set the data of EEPROM(ADDRESS 140) to 00.
4. Access command to the Hotel mode setup menu
- Prerequisite : It is conditions that the data of
5. Explain the Hotel mode setup menu
CAUTION
This setup is not valid, unless data of EEPROM(ADDRESS 140)
will be 00, even if each settings were done.
PDF created with pdfFactory Pro trial version
Next, Push the Power switch(button) off/on the set(the remote
control) to turn the set off/on.
Then, it is no longer hotel mode.
EEPROM(ADDRESS 140) is 80.
In order to display the Hotel mode setup menu, please enter
the following command (within 2 second).
[[TV]:down + [REMOTE]:TV/AV(3 times)]
Then, the Hotel mode setup menu is displayed.
41
www.pdffactory.com
Advertisement
