Bair Hugger 750 Operator's Manual page 10

12
standby
When the unit is in Low, Medium, High, or Ambient mode, press the Standby button to
place the unit in Standby mode�
When you select the Standby mode, the following events occur:
• Standby indicator light illuminates�
• Blower and heater are turned OFF�
• Alphanumeric display deactivates�
• Alarm and fault detection functions remain active�
• Operating timer pauses�
temp in range indicator light
The Temp in Range indicator light illuminates when the temperature at the blanket end
of the hose is ±1�5˚C of the selected setting; this indicator light does not illuminate in
the Ambient mode�
fault indicator light
When a system fault occurs, the amber Fault indicator light flashes and an alarm sounds�
Please refer to What to Do in Case of a Fault Condition on page 15 for additional
information�
-
over temp indicator light
If the unit senses an over-temperature condition, the red Over-temp indicator light
flashes and an alarm sounds�
Please refer to What to Do in Case of an Over-Temperature Condition on page 15 for
additional information�
Bair Hugger Model 750 Temperature Management Unit Operator's Manual