IBM BladeCenter HT 8740 Problem Determination And Service Manual page 65

c. Secure the bezel collar to the BladeCenter HT unit by using a phillips-head
screwdriver to tighten the captive mounting screws on the cable
management trays.
7. Reinstall the management module 1 and its interposer tray into management
module bay 1. See "Installing a management-module interposer" on page 74
and "Installing a management module" on page 76 for more information.
8. Reinstall any high speed switches and their interposer trays into I/O bays 7
and 8. See "Installing a high-speed I/O-module interposer tray" on page 67 and
"Installing a high-speed I/O module" on page 72 for more information.
Chapter 4. Removing and replacing BladeCenter HT components
47