Subscribe to Our Youtube Channel
Related Manuals for GPS GPS-iRIB-18
Summary of Contents for GPS GPS-iRIB-18
- Page 1 Installation, Operation & Maintenance Manual GPS-iRIB -18 & GPS-iRIB ® ® NOTICE: This product is to be used only as directed. Read entire manual before use. Do not use unless properly installed. www.globalplasmasolutions.com www.gpsair.com...
- Page 2 PTACs. The units can be installed on systems where there may not be enough room between the filter and the coil for traditional GPS products. The units come with adhe- sive-backed hook and loop tape for ease of installation.
- Page 3 Figure 1 Mount GPS-iRIB to the Secure power top coil or plastic strip if supply within unit. available Operation 1. Turn on power to the AHU. 2. The ion device will be powered when power is applied to the AHU. Note: the ion device is designed to remain energized 24/7 and does not have to cycle with the fan.
- Page 4 Note: In order to prevent damage to the emitter tape, the should note be folded over onto itself. An iRIB-18 should be fitted to a coil/substrate that is continuous and at least 18” long. Where the coil/substrate exceeds 18”, the polyimide tape emitter portion of the iRIB should be centralized on the substrate it is to be attached to. An iRIB-36 should be fitted to a coil/substrate that is continuous and at least 36”...
- Page 5 To access a list of applicable patents, please visit www.gpspatents.com www.globalplasmasolutions.com www.gpsair.com © 2022 GPS Air GPS Air is the owner of certain trademarks that appear in our materials. Please visit www.gpsair.com/trademarks for a list of our marks. GPS-041-13-R20-iRIB IOM...
Need help?
Do you have a question about the GPS-iRIB-18 and is the answer not in the manual?
Questions and answers