Page 1
Installation, Operation & Maintenance Manual ™ NOTICE: This product is to be used only as directed. Read entire manual before use. Do not use unless properly installed.
Page 3
REMARQUE: Température d'utilisation - Température ambiante maximale à laquelle l'unité doit être utilisée: 140°F/60°C. The CI-2 is capable of being installed in a wide range of applications. Actual location and suitability will vary based on equipment manufacturer. Some recommended installations are below.
Page 4
2. The mounting bracket should be used with appropriate fasteners in high vibration and on non-ferrous surfaces (see Figure 2) 3. Airflow should be aligned with the indicator on the CI-2 (see Figure 3) Figure 1 Figure 2 Figure 3...
Page 5
Ceiling Cassette 1. Optimum installation location is on the fan inlet shroud. 2. Ensure installation of device does not hinder or interfere with any covers on ceiling cassette. Air Handler 1. Optimum installation location is on the fan inlet.
Page 6
1. Mini splits are compact by design and configurations will vary greatly between manufacturers. 2. The blower outlet and coils are the most likely installation locations. 3. Ensure installation of the CI-2 does not hinder covers and guards. PTAC 1. PTAC units are compact by design and configurations will vary greatly between manufacturers.
Page 7
White = Dry Contacts / BAS Alarm 3. Wire in BAS terminals (optional). The CI-2 is equipped with a set of dry contacts that are normally open and close when the CI-2 is on and has no faults. The contacts are rated up to 125VAC and 300mA.
Need help?
Do you have a question about the CI-2 and is the answer not in the manual?
Questions and answers