Learning the Buttons and Lights
Button
What it does
Turn the camera on. Press and hold to turn it off.
POWER
Enter pairing mode.
LInk
Light
State
Power Status
light
Flashing The camera is in pairing mode.
Link Status
Orange
light
Green
Battery
Red
Status light
Using the Camera Mount
The camera has a built-in stand so you can place it on any flat surface. If you
want to place your camera on a wall or a ceiling (or even if you just want to
secure it to a flat surface), you can use the included camera mount. (You might
want to bring the receiver along when you mount the camera; it's much easier
to get the camera into the right position when you have the display handy.)
6
UWS1100 OM.indd 6
What it means
On
The camera is on.
Off
The camera is off.
The camera is connected to the receiver.
Off
The camera is in standby.
The battery is charging.
The battery is low; the camera will turn off in 3 minutes.
Off
The battery is fully charged.
18/11/09 6:55:28 PM