Table of Contents
Advertisement
Connecting the Power
1. Connect one end of
the AC adapter
to the camera's
power connector
and the other
end to a standard
240 volt AC
indoor outlet.
2.
Press the
POWER
button on the
camera; the
Power status light
should turn on.
If it doesn't, try
reconnecting the
AC adapter, and
make sure the
power outlet isn't
controlled by a
wall switch.
Charging the Batteries
The batteries in your camera will charge whenever the power is connected. Let
the batteries charge completely (about 8 hours) before you unplug the camera
to move it around. (You can still use the camera: just keep it plugged in.)
UWS1100 OM.indd 5
Getting Started
Battery
status
Link
status
Power
status
Antenna
Lens
POWER
LINK
Power
connector
L I N K
Stand
18/11/09 6:55:28 PM
5
Advertisement
Table of Contents
