Terra MHI512 Quick Start Manual

Connect to HDMI
video equipment
After connecting the power supply, wait until the green or red status indication LED lights up on the front streamer panel.

Initial login:

• If you connect the streamer to network router - IP address of WEB configuration interface
will be assigned by your network router DHCP server. Use the following mDNS address to
access the device interface:
NOTE: mDNS protocol is supported in Windows and macOS operating systems only.
• If you connect the streamer to personal computer IP address of WEB configuration interface
will be set to:
If you cannot connect, please read troubleshooting guide and user manual.
Enter default username and password admin/admin in the login window.

Configuration:

• After the 1
Watching
• The "Playlist" section of the menu displays the playlist URL for third-party players that
video stream:
support M3U playlist format. Copy this URL and paste to your video player.
Third-party TV players tested:
o PLEX
o Emby
o SS IPTV
o Smart UP TV
o OTT Player
o Smart IPTV
• "Terra TV" Android app can also be used on Android based TV or phone to watch video.
• Any Smart TV supports DLNA. Just press the "Source" button on the TV remote control and
select MHI512 device from the list. Choose a "HDMI video" from the list and enjoy!
NOTE: TVs from different manufacturers may have a different DLNA name. For example, LG

Recording:

• USB option
o Connect USB memory or SSD/HDD to the device. In case of the HDD, an external power
o In the "Recordings / Storage" menu, select "Storage type" as the "USB". The NTFS file
• Network disk (NAS) option
o In the "Recordings / Storage" menu, select "Storage type" as the "Network drive".
o Enter IP and path at "Network drive address". Add username and password of the disk
o Go to "Recordings / Schedule" and create a recording schedule. Don't forget to check if
Quickstart Guide MHI512
Y
http://iptv.local
http://192.168.1.10
login, select the country and the language of WEB control interface.
st
Get it from google play at:
calls it "SmartShare".
supply may be required;
system is recommended, but FAT32 is also supported.
or leave it empty if authentication is not used.
the system time is set correctly in the "System menu / Date, time" submenu.

Connect to network

(home router or PC)
Y
-

Connect power

supply