Technical Data - DeWalt XR DCD800 Manual

DRILL
DCD800
DRILL/HAMMERDRILL
DCD805
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No‑load speed
1st gear
2nd gear
Impact rate
1st gear
2nd gear
Max. torque (hard/soft)
Chuck capacity
Maximum drilling capacity
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841‑2‑1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level) dB(A)
Drilling into metal
Vibration emission value a
h,D
Uncertainty K =
Drilling into concrete
Vibration emission value a
h,ID
Uncertainty K =
WALT one of the
e
DCD800
V 18
DC
1
Li‑Ion
min ‑1 0–650
min 0–2000
‑1
min —
‑1
min ‑1 —
Nm 90/27
mm 1.5–13.0
mm 55
mm 13
mm —
kg 1.28
dB(A) 74
dB(A) 85
5
= m/s 2 < 2.5
m/s 2 1.5
= m/s 2 —
m/s 2 —
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
DCD805
if the tool is used for different applications, with different
18
accessories or poorly maintained, the vibration and/or
1
noise emission may differ. This may significantly increase
the exposure level over the total working period.
Li‑Ion
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
0–650
tool is switched off or when it is running but not actually
0–2000
doing the job. This may significantly reduce the exposure
level over the total working period.
0–11050
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
0–34000
as: maintain the tool and the accessories, keep the
90/27
hands warm (relevant for vibration), organisation of
1.5–13.0
work patterns.
EC‑Declaration of Conformity
55
Machinery Directive
13
13
1.34
Drill/Impact Drill
DCD800, DCD805
D WALT declares that these products described under
e
90
Technical Data are in compliance with:
101
2006/42/EC, EN62841‑1:2015, EN62841‑2‑1:2018+A11:2019.
5
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
< 2.5
The undersigned is responsible for compilation of the technical
1.5
file and makes this declaration on behalf of D
11
1.5
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
65510, Idstein, Germany
30.10.2021
English
WALT at
e
WALT.
e
3