KRESS KUS35P Safety And Operating Manual
  1. Manuals
  2. Brands
  3. KRESS Manuals
  4. Grinder
  5. KUS35P
  6. Safety and operating manual

KRESS KUS35P Safety And Operating Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SAFETY AND OPERATING MANUAL
Angle Grinder
KUS35P

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KUS35P and is the answer not in the manual?

Questions and answers

Related Manuals for KRESS KUS35P

Summary of Contents for KRESS KUS35P

  • Page 1 SAFETY AND OPERATING MANUAL Angle Grinder KUS35P...

  • Page 3: General Power Tool Safety Warnings

    A moment of tools. inattention while operating power tools may result Keep cutting tools sharp and clean. Properly in serious personal injury. maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Angle Grinder KUS35P...

  • Page 4: Safety Instructions For All Operations

    Loss of control can cause each use inspect the accessory such as personal injury abrasive wheels for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires. If power tool or accessory is Angle Grinder KUS35P...

  • Page 5: Further Safety Instructions For All Operations

    Do not attempt to make an excessive depth of cut. Overstressing the wheel increases the loading and susceptibility to twisting or binding of the wheel in the cut and the possibility of kickback or wheel breakage. Angle Grinder KUS35P...
  • Page 6 RCM marking ABN: Australian Business Number. By this number, business information such as entity type, status, business location etc. can be found at website http:// abr.business.gov.au. ABN of Positec Australia Pty Limited is 14 101 682 357 Angle Grinder KUS35P...
  • Page 7 Angle Grinder KUS35P...
  • Page 8 Angle Grinder KUS35P...

  • Page 9: Component List

    See Fig. C1 Adjusting Outer Flange Clamping TECHNICAL DATA OPERATION Using On/Off Switch See Fig. D Type KUS35P (S35P- designation of machinery, representative of Angle Grinder) Hand Grip Areas See Fig. E Soft Start** KUS35P Rough Grinding...

  • Page 10: Maintenance

    Note: The material of the power cord used in this product should be at least heavy-duty neoprene (code 60245 IEC66) or equivalent flexible cord. Positec Australia Pty Limited 10 Corporate Blvd Bayswater, VIC 3153, Australia Angle Grinder KUS35P...
  • Page 12 Copyright © 2022, Positec. All Rights Reserved.

Table of Contents