Replacing The Battery - HP Brio BA300 Upgrade Manual

Hp brio ba300: supplementary guide

Hide thumbs Also See for Brio BA300:

Table of Contents

Replacing the Battery

WARNING

There is a danger of explosion if the battery is incorrectly installed. For your safety, never attempt to recharge, disassemble

or burn the old battery. Replace the battery only with the same or equivalent type recommended by the manufacturer. The

battery in this PC is a lithium battery which does not contain heavy metals, nevertheless, in order to protect the

environment, do not dispose of batteries in household waste. Please return used batteries to the shop from which you

bought them, or to the dealer from which you purchased your PC, or to HP , so that they can either be recycled or disposed

of in an environmentally sound way. Returned used batteries will be accepted free of charge.

1 Switch off the PC, disconnect the power cord and remove the PC's cover (refer to page 9).

2 Lay the PC on its side to allow easy access to the system board.

Position of battery

3 Remove the old battery by pressing the retaining clip with a flat-headed screwdriver and lifting the

battery clear of the battery holder.

4 Place the new battery in the battery holder, with the "+" sign on top and ensure that it is properly

seated.

5 Replace the PC's cover (refer to page 11).

Upgrading and Replacing PC Hardware

Table of Contents