Remote Control - Yamaha CDS-300B Owner's Manual

CONTROLS AND FUNCTIONS

Remote control

1 Infrared signal transmitter
Sends infrared signals to this unit.
2 CD/USB
Switches between CD mode and iPod/USB mode (see
page 6).
y
This setting is retained even if you turn off this unit.
3 PROGRAM
Turns on or off the program playback mode. See
"Program playback" on the next page.
4 DIMMER
Each time you press DIMMER, the brightness level
changes by 4 levels.
4
En
■ Installing batteries in the remote control
1
Press the part and slide the battery
compartment cover off.
2
Insert the two supplied batteries (AA, R6,
UM-3) according to the polarity markings (+
and –) on the inside of the battery
compartment.
3
Slide the cover back until it snaps into place.
■ Using the remote control
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the front panel of this unit during
operation.
Within 6 m
(20 ft)
y
This setting is retained even if you turn off this unit.
5 Numeric buttons
Use to select directly a track on the disc or a file in the
current folder.
6
(Search backward),
forward)
Searches tracks backward/forward while the key is
pressed.
7
(Skip backward),
: Skips to the next track.
: Skips back to the beginning of the current track.
(twice): Skips to the previous track.
(Search
(Skip forward)