HP Brio 8500 Online Manual page 47

3 Upgrading and Adding Accessories
Troubleshooting
If the new processor is not recognized, the startup routine will stop shortly after you turn on the computer. If this
happens, turn off the computer and check that you have correctly installed the processor.
If the new processor is still not recognized, remove it and put the old processor back into the computer (remember to
reset any system board jumpers if necessary), and then restart the computer. If the computer now starts without any
problems, there may be a problem with the new processor.
If you experience any other problems as a result of the upgrade, and your computer is supplied with the HP Brio Center,
refer to the support tools for further assistance.
"%