Download Print this page

Troubleshooting Guide - Kenwood ZJP04 Instructions Manual

Hide thumbs Also See for ZJP04:

Advertisement

you supply your receipt to
l
show when you bought it.
This guarantee does not affect
your statutory rights.
Children and burns
or scalds
Advice from the British Burn
Association
Every year, 30,000 children go
to hospital with burns. What
might be a minor burn for an
adult could horrifically injure -
or even kill - a child.
take these precautions
Keep hot drinks out of
l
children's reach.
Do not drink while holding your
l
baby. If you're passing someone
a drink, make sure a child isn't
underneath.

Troubleshooting guide

Problem
Kettle not operating.
Kettle not switching
off automatically after
boiling/Long switch
off time.
Water splashing out
of spout area.
Kettle switching on
and off during use or
switching off before
water boiled.
Kettle stopped
working during
operation.
If none of the above solve the problem see "Service & Customer Care".
English
l
l
l
l
Cause
No Power.
Kettle unplugged.
Kettle overfilled.
Lid not closed.
Filter not fitted in
spout area.
Limescale/mineral
build up on element free from scale.
affecting operation. Refer to "descaling"
Boil dry protection
operated due to
insufficient water in Allow to cool down
the kettle.
7
Keep your kettle, and its cord,
well back from the worktop
edge so that children can't grab
them.
Keep children away from the
kitchen work area.
For baby's bath, run the cold
water first, then add the
hot. Mix well and test the
temperature with your elbow
before you put baby in.
Teach children about hot things.
Run cold water over a burn
immediately, then get medical
help. Do not stop to remove
clothing.
Solution
Check kettle is plugged in.
Check kettle is correctly
located to the powerbase.
Check water level is not
above the Max level.
Check lid is closed
correctly.
Always use the filter and
do not overfill above the
Max level.
Check that the element is
section under care and
cleaning.
Switch off and remove
from the powerbase.
before refilling.
When the kettle has
cooled down the switch
will reset itself.
Check the water level is
above the minimum level.

Advertisement

loading