Page 1
English 2 - 7 TYPE ZJG800 ´ ¸ ∂ TYPE ZJG801 instructions HE D OFFICE: Kenwood Limited, 1-3 Kenwood Business Park, New Lane, Havant, Hampshire PO9 2NH 128710/2...
Page 2
English safety Read these instructions carefully and retain for future reference. Remove all packaging and any labels. To prevent damage to the kettle: Avoid contact with hard surfaces and objects; Avoid knocking the glass body against the tap when filling. Do not use the kettle if it has been dropped or damaged i.e.
Page 3
8 years. Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.
Note - To interrupt the boiling your Kenwood Authorised Repairer ensure that the switch is in (see Service). the off position before If a non-rewireable plug is cut off it removing from the powerbase.
4 To refit – line the filter up with the guarantee) bracket in the spout area and call Kenwood Customer Care on slide the filter back into the slot 023 9239 2333. Have your then push down to clip securely into model number ready (e.g.
Page 6
Designed and engineered by children and burns or Kenwood in the UK. scalds Made in China. advice from the British Burn guarantee (UK only) Association If your kettle goes wrong within one Every year, 30,000 children go to year from the date you bought it, we hospital with burns.
troubleshooting guide Problem Cause Solution Kettle not operating. No Power. Check kettle is plugged in. Kettle unplugged. Check kettle is correctly located to the powerbase. Kettle not switching off Kettle overfilled. Check water level is not automatically after above the Max level. boiling/Long switch off time.