Table of Contents
Advertisement
ideapad Y700-15ACZ Hardware Maintenance Manual
1020 Battery pack
For access, remove this FRU:
• "1010 Base cover" on page 33
Figure 2. Removal steps of battery pack
Unplug the battery connector in the direction shown by arrow 1, then remove
the screws 2. Remove the battery pack 3.
When installing: Make sure that the battery connector is attached firmly.
36
DANGER
Only use the battery specified in the parts list for your computer. Any other battery
could ignite or explode.
Step
Screw (quantity)
M2 × 5.0 mm, flat-head, nylok-coated (3)
2
BATT to LOGIC UP SUB
Color
Torque
Black
2.0 ± 0.15 kgf.cm
Advertisement
Table of Contents
