Table of Contents
Advertisement
ideapad Y700-15ACZ Hardware Maintenance Manual
1070 Subwoofer
44
For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 36
Figure 7. Removal steps of subwoofer
Unplug the subwoofer connector in the direction shown by arrow 1. Remove
the screws 2. Then remove the subwoofer in the direction shown by arrow 3.
Note: Be careful not to damage the connector.
Step
Screw (quantity)
M2.0 × 3.0 mm, flat-head, nylok-coated (2)
2
SUB WOOFER to KB SUP BKT
When installing: Make sure that the connector is attached firmly.
Color
Torque
Black
2.0 ± 0.15 kgf.cm
Advertisement
Table of Contents
