Lenovo ideapad 100S-11IBR Hardware Maintenance Manual
1020 Battery pack
For access, remove this FRU:
• "1010 Base cover" on page 32
Figure 2. Removal steps of battery pack
Detach the battery pack connector in the direction shown by arrow 1, remove
the screws 2. Then remove the battery pack in the direction shown by arrow 3.
When installing: Make sure that the battery connector is attached firmly and
route the cable along the cable guides.
34
DANGER
Only use the battery specified in the parts list for your computer. Any other battery
could ignite or explode.
2
Step
Screw (quantity)
M2 × 2.5 mm, Phillips-head, nylok-coated (5)
2
Battery pack
2
2
3
2
1
2
Color
Torque
White
2.5±0.2Kgf