Table of Contents
Advertisement
1060 LED board
For access, remove these FRUs in order:
• "1010 Base cover" on page 33
• "1020 Battery pack" on page 36
Figure 6. Removal steps of LED board
Detach the LED board connector in the directions shown by arrows 1 and 2.
Remove the screw 3. Then remove the LED board in the direction shown by
arrow 4.
Step
Screw (quantity)
M2.0 × 3.0 mm, flat-head, nylok-coated (1)
3
LED PCB to LOGIC UP SUB
Lenovo ideapad Y700-15ACZ
Color
Torque
Black
2.0 ± 0.15 kgf.cm
43
Advertisement
Table of Contents
