Table of Contents
Advertisement
Pause dialing
When you call an automated system, like a
banking service, you are often required to enter a
password or account number. Instead of manually
entering the numbers each time, you can store
the numbers in your Contacts, separated by
pauses.
There are 2 kinds of pauses that can be entered
on your phone:
• P pause: A hard pause stops the dialing
sequence until you press the SEND key.
• T pause: A 2-second pause stops the dialing
sequence for two seconds and then
automatically sends the remaining digits.
Storing pauses in a Contacts entry
To store a number in your Contacts that contains
pauses:
1. In Standby mode, enter a phone number you
want to store, such as the bank's teleservice
phone number.
2. Press the Options soft key.
3. Select the required pause type and press the
OK soft key.
• P Pause. The letter "P" displays, meaning
that a hard pause will occur at that point in
the dialing sequence.
• T Pause. The letter "T" displays, meaning
that a "2-second" pause will occur at that
point in the dialing sequence.
4. Enter the digits that need to follow the pause,
such as your account number.
Call functions
21
Advertisement
Table of Contents
