Advertisement
camera operation
M
If the defog mode is set to Auto, and if the amount of fog is reduced, the function level will be
also reduced. If you want to maintain the same level of defogging, set it to Manual.
If there is little fog and the manual fog level is high, the screen contrast can get high.
PriVaCY : Mask an area you want to
❶
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
'PRIVACY'.
❷
Select a desired mode using the
Function Setup switch.
-
AREA : You can select up to 24
-
MODE : Determines whether to use the area selected in the AREA.
-
MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White,
-
TRANSPARENCY : Adds or removes transparency from the masking area.
-
SEL POS/ XPOS/ YPOS : Adjust the size and position of the selected area.
-
RETURN : Return to the SPECIAL menu.
Dis (Digital image stabilizer) : This function mitigates any picture movement due to
ViDEo analYTiCs
❶
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
'VIDEO ANALYTICS'.
❷
Select a desired mode using the
Function Setup switch.
-
TAMPERING : If the screen view
30_ camera operation
hide on the screen.
PRIVACY areas.
Gray.
is obstructed or the
camera location
is changed,
tampering
detection, you can
issue an event signal by setting it.
AREA
▶
1.
MODE
2.
MASK COLOR
3.
TRANSPARENCY
4.
SEL POS
5.
X POS
6.
Y POS
7.
RETURN
8.
external factors such as wind.
▶
1. TAMPERING
2. MOTION
3. INTELLIGENCE
RETURN
4.
SENSITIVITY
▶
1.
ALARM OUT
2.
RETURN
3.
PRIVACY AREA SETUP
--------
-
-------
VIDEO ANALYTICS
TAMPERING
AREA
1
OFF
GREEN
OFF
L_TOP
18
33
OFF
OFF
OFF
MIDDLE
Advertisement
