Searching For Digital Television Channels Through Cable Automatically - Beko B40K 580 Brief Instruction

DETAILED CHANNEL SETTINGS
Searching for digital television
channels through cable auto-
matically
1 Open the »Input Source« menu with »
2 Select »DTV« using »
firm with »OK«.
3 Press »MENU« to open the menu.
< >
4 Press » « or » « to select the »CHANNEL«
menu and press »OK« to confirm.
– »CHANNEL« menu is now enabled.
5 Select »Auto Tuning« with »
confirm with »OK«.
– »Tuning Setup« menu will be displayed.
Tuning Setup
Country
Tune Type
Scan type
Scan Type
Network ID
Frequency
Symbol Rate
Back
MENU
6 Go to »Scan Type« with »
select »DVB-C« with »
7 Go to »Country« with »
select the country with »
Television / User Manual
«.
« or » « and con-
V Λ
« or » « and
V Λ
Turkey
DTV
DVB-C
Full
Auto
Auto
Auto
Start
ENTER
« or » « and
V Λ
< >
« or » «.
« or » « and
V Λ
< >
« or » «.
----------------------------------------------------
8 Select »Tune Type« with »
<
select »DTV« with
9 Select »Scan Type« using »
select (»Network Scan« or »Full«) with »
>
or » «.
– »Network Scan« scanning function sets
the channels according to the cable
operator information in the broadcasting
signal.
– »Full« scan function scans the entire fre-
quency range selected. With this search
option, search can take a long time. This
search type is recommended. Some cable
providers do not support »Quick« scan.
Note:
You can speed up the search. To do this,
7
frequency and network ID information are
required. You can obtain such information
from your cable provider or find them in
Internet forums.
10 Press »OK« to start the search.
– The »Channel Tuning« menu will be
displayed and the search for TV channels
will start.
– Search may take several minutes depend-
ing on the number of television channels
received.
Note:
The search can be aborted with »EXIT«.
7
11 Press »EXIT« to end searching.
« or » « and
V Λ
>
« or » «.
« or » « and
V Λ
<
«
47 / 57 TR