Specifications - Kenwood DPX-M3300BT Instruction Manual

Troubleshooting
Symptom
Sound is being interrupted or • Reduce the distance between the unit and the Bluetooth
skipped during playback of a
Bluetooth audio player. • Turn off, then turn on the unit and try to connect again.
• Other Bluetooth devices might be trying to connect to the
The connected Bluetooth • Check whether the connected Bluetooth audio player
audio player cannot be
controlled.
• Disconnect and connect the Bluetooth player again.
"NOT SUPPORT"
"NO ENTRY"
"ERROR"
"NO INFO"/"NO DATA"
"HF ERROR XX"/
"BT ERROR"
"SWITCHING NG"
The Bluetooth connection
between the Bluetooth
device and the unit is
unstable.
Remedy
audio player.
unit.
supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)
The connected phone does not support Voice Recognition
feature or phonebook transfer.
There is no registered device connected/found via
Bluetooth.
Try the operation again. If "ERROR" appears again, check
if the device supports the function you have tried.
Bluetooth device cannot get the contact information.
Reset the unit and try the operation again. If this does not
solve the problem, consult your nearest service center.
The connected phones might not support phone
switching feature.
Delete the unused registered Bluetooth device from the
unit. (Page 18)

Specifications

FM Frequency Range
Usable Sensitivity
(S/N = 30 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response
(±3.0 dB)
Signal-to-Noise Ratio (MONO) 64.0 dB
Stereo Separation (1 kHz)
AM Frequency Range
Channel Space Selection
Usable Sensitivity
(S/N = 20 dB)
USB Standard
File System
Maximum Supply Current
Frequency Response (±1 dB)
87.5 MHz — 108.0 MHz (50 kHz step)
8.2 dBf (0.71 μV/75 Ω)
17.2 dBf (2.0 μV/75 Ω)
30 Hz — 15 kHz
40 dB
Band 1 (MW) 531 kHz — 1 602 kHz
(9 kHz step)
Band 2 (SW1) 2 940 kHz — 7 735 kHz
(5 kHz step)
Band 3 (SW2) 9 500 kHz — 10 135 kHz/
11 580 kHz — 18 135 kHz
(5 kHz step)
Band 1 9 kHz
Band 2/3 5 kHz
MW 29.0 dBμ (28.2 μV)
SW 30 dBμ (32 μV)
USB 1.1, USB 2.0 (High speed)
FAT12/16/32
DC 5 V 1.5 A
20 Hz — 20 kHz
ENGLISH
33