Operating A Repeater - Gigaset C190A Manual

Operating a repeater

Operating a repeater
You can use the Gigaset Repeater to increase the range of your Gigaset handset.
The function and setting of your repeater depends on the repeater version used. The repeater
version can be identified by the item number on the product label:
Gigaset Repeater (earlier than version 2.0) S30853-S601-...
Gigaset Repeater 2.0
For additional information, see the repeater user guide and our website at
www.gigaset.com
Gigaset Repeater (earlier than version 2.0)
Prerequisites:
u
ECO DECT function Maximum Range must be activated.
u
ECO DECT function No Radiation must be deactivated.
u
Encryption must be deactivated:
Ï
¤ ¤
v
OK
Modifying the ECO DECT functions
Registering a repeater:
¤
Connect the repeater to the mains power supply.
Registration/Paging key on the base (C430A-C530A-C190A-C630A
¢
C430-C530 page 3).
You can register up to 6 repeaters.
Gigaset Repeater 2.0
Registering the Gigaset Repeater 2.0:
¤
Connect the repeater to the mains power supply.
Registration/Paging key on the base (C430A-C530A-C190A-C630A
¢ ¤
page 3). The repeater registers automatically.
You can register a maximum of 2 Gigaset Repeaters 2.0.
The ECO DECT function Maximum Range is activated and No Radiation is deactivated. The set-
tings cannot be changed whilst the repeater is registered.
De-registering the Gigaset Repeater 2.0:
Ï
v ¤ ¤ ¤ q System
OK
32
¤ ¤
q System
OK
¢
page 34.
¤
The repeater registers automatically.
¤ ¤
OK
S30853-S602-...
¤ ¤
q Encryption
¤
Press and hold (min. 3 secs) the
¤
Press and hold (min. 3 secs) the
q Repeater ¤
OK
´
Change ( = deactivated)
¢
page 2,
¢
page 2, C430-C530
¤ q Select repeater. ¤
De-reg.