Restoring The Handset Default Settings; Base Settings; Changing The Ringtones For The Gigaset A510A Base; Activating/Deactivating Music On Hold - Gigaset A510 Duo Manual

Deactivating the ringer permanently
P
Press and hold the star key.
The ó icon appears in the display.
Reactivating the ringer
P
Press and hold the star key.
Deactivating the ringer for the current
call
¤ Silent ¤
§Menu§ §OK§
Activating/deactivating advisory
tones/battery warning tones
Your handset uses advisory tones to tell you
about different activities and statuses. These
can be activated and deactivated independ-
ently of each other:
u Advisory Tones
– Confirmation tone: at the end of an
entry/setting and when a new entry
arrives in the answering machine list
or calls list.
– Error tone: when you make an incor-
rect entry.
– Key click: every key press is confirmed.
u Battery Low
The battery requires charging.
t ¤ Advisory Tones / Battery Low
Select and press
or deactivate (
The menu end tone when scrolling at the
end of a menu cannot be deactivated.
Restoring the handset
default settings
You can reset any individual settings and
changes that you have made.
The following settings are not affected by a
reset:
u Registering the handset to the base
u Date/time
u Entries in the directory, calls lists
¤ Settings ¤ System ¤ Reset Handset
§Menu§
§OK§
to activate
³
= activated).
§OK§
Confirm prompt.

Base settings

The base settings are carried out using a reg-
istered Gigaset handset.
Changing the ringtones for
the Gigaset A510A base
u Volume:
You can choose between five volumes
and the "crescendo" ring, ¢ page 46.
Select "0" to deactivate the base ringer.
u Ringtones:
You can set a ringtone for external calls,
¢ page 46.
u Time control:
You can specify when the base should
not ring (e.g., during the night).
¤ Settings ¤ Audio Settings
§Menu§
¤ Ringtones (Base) ¤ Ringer Volume /
Ringer Melody / Time Control
For more information on adjusting the set-
tings, see page 46.
Activating/deactivating
music on hold
¤ Settings ¤ Telephony
§Menu§
¤ Music on hold
§OK§
Press to activate or deactivate music on
hold (³ = on).

Repeater support

You can increase the range and signal
strength of the base using a repeater. You
will need to activate repeater mode. This will
terminate any calls that are in progress at the
time.
Prerequisite: a repeater is registered.
¤ Settings ¤ System
§Menu§
¤ Repeater Mode
Base settings
47