Table of Contents
Advertisement
Getting started
Connecting the charging cradle (if included)
2
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film!
Inserting the batteries and closing the battery cover
Caution
Use only rechargeable batteries recommended by Gigaset Communications GmbH
¢
(
page 63) , as this could otherwise result in significant health risks and personal injury. For
example, the outer casing of the batteries could be destroyed or the batteries could explode.
The phone could also malfunction or be damaged as a result of using batteries that are not
of the recommended type.
¤
Insert the batteries
with the polarity in
the right direction
(for correct +/- direc-
tion, see diagram).
8
¤
Connect the flat plug to the charging cradle
¤
4
Plug the power adapter into the power socket
If you have to remove the plug from the charging cradle
again:
1
¤
Disconnect the power adapter from the mains
power supply.
¤
Press the release button
3
plug
1
2
¤
Insert the battery cover
1
on the top
¤
Then press the cover until
it clicks into place
3
.
4
To open the battery cover,
.
for example to change the
batteries:
¤
2
.
1
and disconnect the
3
4
Grip the notch on the
cover
and slide it
3
downwards
.
4
.
2
.
Advertisement
Table of Contents
