Backup; Tftp - 3Com ProCurve E4500-48 Getting Started Manual

74 C 6: U
HAPTER PGRADING

Backup

TFTP

S
OFTWARE
To check that deleted files have been removed from the recycle-bin for
the remaining units in a fabric, replace unit1 with unit2 and so on for
each Switch in the fabric.
The following steps enable you to backup each Switch in the fabric:
1 To back up the default configuration file on each Switch in the fabric,
enter:
copy unit1>flash:/3ComOScfg.def
unit1>flash:/030100cfg.def
Replace unit1 with unit2 and so on for each Switch in the fabric.
2 To back up the active configuration file on each Switch in the fabric,
enter:
copy unit1>flash:/3ComOScfg.cfg
unit1>flash:/030100cfg.cfg
Replace unit1 with unit2 and so on for each Switch in the fabric.
3 To back up the Web user interface file on each Switch in the fabric, enter:
copy unit1>flash:/s3p03_01_00.web
unit1>flash:/030100http.zip
Replace unit1 with unit2 and so on for each Switch in the fabric.
To upgrade software to your Switch via TFTP do the following:
1 To download the application file, enter:
tftp aaa.aaa.aaa.aaa get s3n03_01_00s168.app
(where aaa.aaa.aaa.aaa is the IP address of the TFTP server)
s4n indicates the Switch filename, see Table 14 for further details:
Table 14 Switch 4500 Filenames
Filename Prefix
s3n
s3o
2 To download the Web user interface file, enter:
tftp aaa.aaa.aaa.aaa get s3p03_01_00.web
SuperStack 3 Switch 4500 software
SuperStack 3 Switch 4500 bootrom software
Switch