Download Print this page

HP ProCurve J4820B Supplementary Manual page 2

With software release e.09.22

Advertisement

To Download the New Software. Your ProCurve Series 5300xl Switches support several different
methods for downloading new operating system software. For instructions on how to download the
new software, please see appendix A, "File Transfers" in the Management and Configuration Guide
on the Documentation CD-ROM included with your switch.
Saving the Configuration After Installing or Exchanging a Module
The following cases automatically result in a change to the running-configuration on your switch:
If you replace a module with another module of a different type and then reboot the switch
If you install a module in a slot that has not previously been used (including when you install
a module and apply power to the switch for the first time)
If you want to save such changes to permanent memory (startup-configuration), use the write memory
command in the switch console. This causes the switch to use the new hardware configuration for
subsequent reboots. (The switch always reboots from the startup-configuration.)
If you do not save the hardware changes to the startup-configuration, you will be prompted with the
following message the next time you use the boot or reload commands:
Do you want to save the current configuration [y/n] ?
For more information on switch memory, including the startup-config and running-config memories,
refer to the Management and Configuration Guide on the Documentation CD-ROM included with
your switch. For the latest version of HP switch documentation, visit http://www.procurve.com. (Click
on Technical support, then Product manuals.)
For more information regarding the software documentation for the PoE module refer to either of
the following:
Release Notes: Version E.08.30 or later for the ProCurve series 5300xl Switches (part
number 5990-6004).
ProCurve Series 5300xl Management and Configuration Guide (part number 5990-6050,
edition 2, March 2004 or later), in chapter titled "Power Over Ethernet (PoE) Operation.
For the latest version of this documentation, visit http://www.procurve.com. (Click on Technical support,
then Product manuals, then ProCurve 5300xl Series.) Under Current Manuals, click on one of the
following links:
Release Notes: Version E.09.22 for the ProCurve Series 5300xl Switches
- or-
ProCurve Series 5300xl Switches Management and Configuration Guide (Edition 2, March 2004)
© Copyright 2005 Hewlett-Packard Company, L.P.
The Information contained herin is subject to
change without notice.
Part Number: 5991-2150
April 2005
Printed in Singapore
*5991-2150*

Advertisement

loading

This manual is also suitable for:

J4821bProcurve switch xl moduleJ4878b