Download Print this page

Specifications - HP ProCurve 8108 Datasheet

Procurve 8100fl series

Advertisement

HP ProCurve Switch 8100fl Series

Specifications

Included accessories
Ports
Power supplies
Physical characteristics
Dimensions
Weight
Memory and processor
Fabric
Interface Module
Management Module
Mounting
Performance
Latency
Throughput
Routing/Switching capacity
Routing table size
Environment
Operating temperature
Operating relative humidity
Non-operating/Storage temperature
Non-operating/Storage relative humidity
Altitude
Electrical characteristics
Maximum heat dissipation
HP ProCurve Switch 8108fl (J8727A)
1 HP ProCurve Switch fl Redundant Management Module (J8731A)
1 HP ProCurve 8108fl Redundant Switch Fabric Module (J8729A)
1 HP ProCurve Switch fl Redundant Power Supply (J8732A)
8 open module slots
Supports a maximum of 80 auto-sensing 100/1000 ports or 16
10-GbE ports or 80 mini-GBICs, or a combination
includes: 1 x J8732A
2 open power supply slots
21.5(d) x 17.3(w) x 22.7(h) in. (54.61 x 43.94 x 57.66 cm) (13U
height)
219.7 lb. (99.66 kg)1 8-slot chassis, 2 switch fabric modules, 2
management modules, 2 fan trays, 3 power supplies, 8 internal
modules, Fully loaded
PowerPC IBM405 @ 266 MHz, 16 MB flash, 16 MB SRAM, 256 MB
SDRAM
PowerPC IBM405 @ 266 MHz, 16 MB flash, 256 MB SDRAM; packet
buffer size: 128 MB RL-DRAM per module
PowerPC MPC7410 @ 400 MHz, 16 MB flash, 512 MB compact
flash, 1 GB SDRAM
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet
(hardware included); horizontal surface mounting only. Requires 2 or
more persons or lift-jack assistance.
< 25 µs (FIFO 64-byte packets)
up to 119 million pps
160 Gbps
100000 entries
41ºF to 104ºF (5ºC to 40ºC)
15% to 80% @ 104ºF (40ºC), non-condensing
-40ºF to 158ºF (-40ºC to 70ºC)
0% to 90% @ 149ºF (65ºC), non-condensing
up to 15000 ft. (4.57 km)
5119 BTU/hr (5401 kJ/hr)
HP ProCurve Switch 8116fl (J8728A)
1 HP ProCurve Switch fl Redundant Management Module (J8731A)
1 HP ProCurve 8116fl Redundant Switch Fabric Module (J8730A)
2 HP ProCurve Switch fl Redundant Power Supply (J8732A)
16 open module slots
Supports a maximum of 160 auto-sensing 100/1000 ports or 32
10-GbE ports or 160 mini-GBICs, or a combination
includes: 2 x J8732A
1 open power supply slots
21.5(d) x 17.3(w) x 34.8(h) in. (54.61 x 43.94 x 88.39 cm) (20U
height)
340 lb. (154.22 kg)1 16-slot chassis, 2 switch fabric modules, 2
management modules, 2 fan trays, 3 power supplies, 16 internal
modules, Fully loaded
PowerPC IBM405 @ 266 MHz, 16 MB flash MB, 16 MB SRAM, 256
MB SDRAM
PowerPC IBM405 @ 266 MHz, 16 MB flash, 256 MB SDRAM; packet
buffer size: 128 MB RL-DRAM per module
PowerPC MPC7410 @ 400 MHz, 16 MB flash, 512 MB compact
flash, 1 GB SDRAM
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet
(hardware included); horizontal surface mounting only. Requires 2 or
more persons or lift-jack assistance.
< 25 µs (FIFO 64-byte packets)
up to 238 million pps
320 Gbps
100000 entries
41ºF to 104ºF (5ºC to 40ºC)
15% to 80% @ 104ºF (40ºC), non-condensing
-40ºF to 158ºF (-40ºC to 70ºC)
0% to 90% @ 149ºF (65ºC), non-condensing
up to 15000 ft. (4.57 km)
10238 BTU/hr (10801 kJ/hr)
3

Advertisement

loading