Table of Contents
Advertisement
3 Add M.2 SSD to M2D17 adapter card:
a Insert M.2 SSD into the slot. Make sure the card is fully inserted.
b Tighten the SSD with a screw.
c Repeat previous two steps if installing another optional SSD is needed. Slot numbers are shown as below.
4 Install the M2D17 adapter card:
a Remove the screw that secures the adapter slot's cover.
b Remove the adapter slot's cover.
c Align the card's connectors with the adapter slot, and insert the card into the slot.
d Put back and fasten the screw that you removed in step 4-a so as to secure the newly inserted card.
5 Put back the top cover that you removed in step 2 and tighten the srcews.
13 Chapter 2: Hardware Setup
Advertisement
Table of Contents
