Table of Contents
Advertisement
Accessibility
Base unit
To activate this feature or change the current setting, press MSLOW
TALKN repeatedly.
– When talking on outside calls or screening calls
Switches between normal speed and slow speed.
– When playing answering system messages
Switches between normal speed, slow speed, and slower speed.
SLOW TALK indicator
Light off
Light
Flashing
Note:
R Slow talk is automatically deactivated when the call ends or when you stop playback.
R This feature is not available for intercom calls or greeting message playback.
Using assistive listening devices
If you use hearing aids that are compatible with a neckloop, you
can connect your neckloop to a handset and enjoy hands-free
conversations. When talking on the phone, you can speak using
the neckloop's microphone or the handset's microphone depending
on the neckloop's features and the handset's settings.
– Hearing aids that are equipped with a telecoil (T-coil)
– Audio neckloops with a 3-pole, 2.5 mm plug
– Audio neckloops with a 3-pole, 3.5 mm plug
*1
In this case, a 3-pole 3.5 mm to 3-pole 2.5 mm adaptor is required.
To use with a T-coil-equipped hearing aid
1
Set your hearing aid to the "T" setting.
R Refer to your hearing aid's operating instructions for details.
2
Hold the handset near your hearing aid when talking.
For assistance, please visit http://shop.panasonic.com/support
32
TGM43x(en)_0426_ver031.pdf
Status
Normal speed
Slow speed
Slower speed
32
*1
2016/04/26
10:55:18
Advertisement
Table of Contents
