Polygroup TG76M3BCYP01 Quick Start Manual

Carefully review all instructions. If you have a problem, call or email the
manufacturer. Tree Warranty is Valid through December 31, 2022.
Email: warranty@polygroup.com
Phone: +1 (888) 919-0070
WARNING:
To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this product. Using a different adapter will damage the lights and may
cause fire, or electrical shock hazards.
b) Do not add any light strings or other power supplies other than what has been provided with this product.
c) Do not mount or support strings in a manner that can cut or damage wire insulation.
d) Do not use near candles, heaters, or other similar sources of heat.
e) Do not use candles on tree.
f ) Do not use near tubs, sinks, or other wet areas.
g) Artificial trees are made from small fibers that may pose a choking hazard if detached from the branches.Use care around
children and pets.
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from
This tree comes with Quick Set® technology - allowing you to set up your tree and light it up in minutes!
Carefully follow the instructions below on how to quickly and easily set up your new tree.
Ensure all packaging is removed before assembly and use. Keep tree's light sets unplugged from power before beginning assembly.
Ensure final assembly is upright and stable.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Section 1
Polygroup®!
Click
Tree top
Section 2
Pull apart the legs of the stand so that they
are snapped into an x-shape. Place the tree
stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
Foot Pedal Insert Green
Label Extension
on/off Switch
Cord into Adapter
Page 1 of 2
C13 7.5FT PRE-LIT WESTWOOD SPRUCE TREE
TG76M3BCYP01
MODEL # :
SKU # : 124331181
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: AC120V, 60Hz, 0.45A
Output: DC 28V, 0.9A
Do Not Tamper
Internal Parts
Open the
cap cover
Align both arrows
in a straight line
before sliding
down to insert
Adapter
To Be Plugged
Into Wall
Outlet