HP ProCurve 2910al-24G Specifications page 7

HP ProCurve 2910al Switch Series
Specifications
Ports
Physical characteristics
Dimensions
Weight
Memory and processor
Processor
Mounting
Performance
1000 Mb Latency
10 Gbps Latency
Throughput
Switching capacity
Routing table size
MAC address table size
Environment
Operating temperature
Operating relative humidity
Non-operating/Storage temperature
Non-operating/Storage relative humidity
Altitude
Acoustic
Electrical characteristics
Description
Maximum heat dissipation
Voltage
Current
Idle power
Power consumption
Frequency
Notes
Safety
Emissions
Immunity
EN
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
Flicker
Management
HP ProCurve 2910al-24G-PoE+ Switch (J9146A)
20 RJ-45 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Media Type:
Auto-MDIX; Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
4 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type
100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a mini-GBIC slot
(for use with mini-GBIC transceivers
1 RJ-45 serial console port
Supports a maximum of 4 10-GbE ports, with optional module
14.4(d) x 17.4(w) x 1.73(h) in. (36.58 x 44.2 x 4.39 cm) (1U height)
12.34 lb. (5.6 kg)
Dual ARM1156T2S @ 515 MHz, 4 MB flash ROM, 1 GB flash, 512 MB
SDRAM; packet buffer size: 6 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
< 2.9 µs (FIFO)
< 1.3 µs (FIFO)
up to 95 million pps
128 Gbps
2,000 entries
16,000 entries
32ºF to 131ºF (0ºC to 55ºC)
15% to 95% @ 104ºF (40ºC), non-condensing
-40ºF to 158ºF (-40ºC to 70ºC)
15% to 95% @ 149ºF (65ºC), non-condensing
up to 10,000 ft. (3 km)
Power: 51.5 dB, Pressure: 38.1 dB; DIN 45635T.19 per ISO 7779
The switch automatically adjusts to any voltage between 100-127 and 200-240
volts and either 50 or 60 Hz
447 BTU/hr (472 kJ/hr), max. using PoE+
100-127 / 200-240 VAC
6.1 / 3.1 A
65 W
490 W
50 / 60 Hz
Idle power is the power consumption of the base system with no traffic.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with fully
loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules
populated.
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class A
EN 55024, CISPR 24
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
IEC 61000-4-5; 1 kV / 2 kV AC, 1 kV signal, 0.5 kV DC
IEC 61000-4-6; 3 V
IEC 61000-4-8; 1 A/m
IEC 61000-4-11; > 95% reductions, 0.5 period; 30% reduction, 25 periods
IEC 61000-3-2
IEC 61000-3-3
HP ProCurve Manager Plus; HP ProCurve Manager; command-line interface;
Web browser; out-of-band management (serial RS-232C)
HP ProCurve 2910al-48G-PoE+ Switch (J9148A)
44 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u
Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Media Type: Auto-MDIX;
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
4 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type
100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a mini-GBIC slot
(for use with mini-GBIC transceivers)
1 RJ-45 serial console port
Supports a maximum of 4 10-GbE ports, with optional module
14.4(d) x 17.42(w) x 1.73(h) in. (36.58 x 44.25 x 4.39 cm) (1U height)
12.96 lb. (5.88 kg)
Dual ARM1156T2S @ 515 MHz, 4 MB flash ROM, 1 GB flash, 512 MB
SDRAM; packet buffer size: 6 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
< 2.9 µs (FIFO)
< 1.3 µs (FIFO)
up to 131 million pps
176 Gbps
2,000 entries
16,000 entries
32ºF to 131ºF (0ºC to 55ºC)
15% to 95% @ 104ºF (40ºC), non-condensing
-40ºF to 158ºF (-40ºC to 70ºC)
15% to 95% @ 149ºF (65ºC), non-condensing
up to 10,000 ft. (3 km)
Power: 51.5 dB, Pressure: 38.1 dB; DIN 45635T.19 per ISO 7779
The switch automatically adjusts to any voltage between 100-127 and 200-240
volts and either 50 or 60 Hz
667 BTU/hr (704 kJ/hr), max. using PoE+
100-127 / 200-240 VAC
6.4 / 3.2 A
89 W
556 W
50 / 60 Hz
Idle power is the power consumption of the base system with no traffic.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with fully
loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules
populated.
EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
FCC part 15 Class A; EN 55022/CISPR-22 Class A; VCCI Class A
EN 55024, CISPR 24
IEC 61000-4-2; 4 kV CD, 8 kV AD
IEC 61000-4-3; 3 V/m
IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
IEC 61000-4-5; 1 kV / 2 kV AC, 1 kV signal, 0.5 kV DC
IEC 61000-4-6; 3 V
IEC 61000-4-8; 1 A/m
IEC 61000-4-11; > 95% reductions, 0.5 period; 30% reduction, 25 periods
IEC 61000-3-2
IEC 61000-3-3
HP ProCurve Manager Plus; HP ProCurve Manager; command-line interface;
Web browser; out-of-band management (serial RS-232C)
7