Axis P3935-RL User Manual page 20

AXIS P3935-LR Network Camera
The device interface
• Refresh: Click
Click to show the live view at full resolution. If the full resolution is larger than your screen size, use the smaller image to
navigate in the image.
Click to show the live video stream in full screen. Press ESC to exit full screen mode.
Installation
Capture mode
the capture mode, it can affect many other settings, such as view areas and privacy masks.
Mounting position
Power line frequency: Select the frequency that is used in your region to minimize image flicker. The American regions
usually use 60 Hz. The rest of the world mostly uses 50 Hz. If you're not sure of your region's power line frequency, check
with the local authorities.
Rotate: Select the preferred image orientation.
Image correction
Important
We recommend you not to use multiple image correction features at the same time, since it can lead to performance issues.
Barrel distortion correction (BDC)
is a lens effect that makes the image appear curved and bent outwards. The condition is seen more clearly when the image is
zoomed out.
Crop : Use the slider to adjust the correction level. A lower level means that the image width is kept at the expense of
image height and resolution. A higher level means that image height and resolution are kept at the expense of image width.
Remove distortion
of image height and resolution. Bloat means that image height and resolution are kept at the expense of image width.
Electronic image stabilization (EIS)
to use EIS in environments where the device is mounted in an exposed location and subject to vibrations due to, for example,
wind or passing traffic.
Focal length
of view, while a lower value leads to a lower magnification and a wider angle of view.
Stabilizer margin
stabilize. If the product is mounted in an environment with a lot of vibration, move the slider towards Max. As a result, a smaller
scene is captured. If the environment has less vibration, move the slider towards Min.
to refresh the still image in the live view.
: A capture mode is a preset configuration that defines how the camera captures images. When you change
: The orientation of the image can change depending on how the camera is mounted.
: Turn on to get a straighter image if it suffers from barrel distortion. Barrel distortion
: Use the slider to adjust the correction level. Pucker means that the image width is kept at the expense
: Turn on to get a smoother and steadier image with less blur. We recommend you
: Use the slider to adjust the focal length. A higher value leads to higher magnification and a narrower angle
: Use the slider to adjust the size of the stabilizer margin, which determines the level of vibration to
20