Control Panel; Buttons - Haier HPND14XHT Installation And User Manual

CONTROL PANEL

BUTTONS

B. Mode
Press the mode button for desired setting.
Cool: sign appears in LCD display when in cooling.
Fan: sign appears in LCD display when in the fan mode.
Heat: sign appears in LCD display when in the heat
mode. (HPND14XHT Only).
C. Fan Speed
There are 3 adjustable speeds in the cool and fan mode:
room temperature is greater than 77° F, fan speed can be
To set the timer for a 1- 24-hour delay until the air
1. When you use the timer setting button while the unit is
2. When you use the timer setting button while the unit is
on standby, you can preset a time for the unit to turn on.
3. If you press the "ON/OFF" button, the preset timer
function will be canceled.
4. Timer setting range is 1-24 hours.
To clear Timer Delay program:
1. Press the Timer Button.
2. Press and hold the minus button until the timer display
has cleared.
To change the remaining time (in hours):
1. Press the Timer Button.
2. Press the plus or minus button to change the delay time
from 1 to 24 hours.
A
C
D
sign appears in LCD display when in
F
B
E
E. Setting the Temperature
To set the temperature, press the + or - key to raise or
lower the temperature. The temperature can be raised
or lowered in the cool mode. The temperature cannot be
simultaneously to switch between °F and °C.
NOTE: The temperature can be set between 61° F to 89°
F (Cool mode) and 61° F to 80° F (Heat Mode).
F. LCD Display
When STOP indicator light turns on, the internal water tank
for directions on draining the air conditioner.
7