Removing And Installing The Air Duct - GIGA-BYTE TECHNOLOGY G481-HA0 User Manual

3-2

Removing and Installing the Air Duct

Before you remove the top rear cover:
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove and install the air duct:
1. Lift up to remove the air duct.
2. To install the air duct, align the rear edge of air duct with the GPU module brackets ensuring that
the arrows on the air duct face the rear of the system as shown in the image below, and then push
down the air duct into chassis until it firmly seats.
- 25 - System Hardware Installation