Makita HS011GZ Instruction Manual page 19

4. Push the wireless activation button on the tool
briefly. The wireless activation lamp will blink in blue.
1
2
Fig.42
► 1 . Wireless activation button 2. Wireless activation
lamp
Description of the wireless activation lamp status
1
Fig.43
► 1 . Wireless activation lamp
The wireless activation lamp shows the status of the wireless activation function. Refer to the table below for the
meaning of the lamp status.
Status Wireless activation lamp
Color
Standby Blue
Tool Green
registration
Cancelling Red
tool
registration
Others Red
Off
Duration
On Blinking
2 hours
When
the tool is
running.
20 seconds Ready for the tool registration. Waiting for the registration by the
2 seconds
20 seconds Ready for the cancellation of the tool registration. Waiting for the
2 seconds
3 seconds
-
5. Turn on the tool. Check if the vacuum cleaner runs
while the tool is operating.
To stop the wireless activation of the vacuum cleaner,
push the wireless activation button on the tool.
NOTE: The wireless activation lamp on the tool will
stop blinking in blue when there is no operation for
2 hours. In this case, set the stand-by switch on the
vacuum cleaner to "AUTO" and push the wireless
activation button on the tool again.
NOTE: The vacuum cleaner starts/stops with a delay.
There is a time lag when the vacuum cleaner detects
a switch operation of the tool.
NOTE: The transmission distance of the wireless unit
may vary depending on the location and surrounding
circumstances.
NOTE: When two or more tools are registered to
one vacuum cleaner, the vacuum cleaner may start
running even if you do not turn on your tool because
another user is using the wireless activation function.
The wireless activation of the vacuum cleaner is available. The
lamp will automatically turn off when no operation is performed
for 2 hours.
The wireless activation of the vacuum cleaner is available and the
tool is running.
vacuum cleaner.
The tool registration has been finished. The wireless activation
lamp will start blinking in blue.
cancellation by the vacuum cleaner.
The cancellation of the tool registration has been finished. The
wireless activation lamp will start blinking in blue.
The power is supplied to the wireless unit and the wireless activa-
tion function is starting up.
- The wireless activation of the vacuum cleaner is stopped.
19 ENGLISH
Description