Kvm - ViewSonic XG340C-2K User Manual

KVM

The KVM function allows the user to control two computers connected to the same
monitor from a single keyboard and mouse.
NOTE: Only applicable in PBP (Picture-by-Picture) and PIP (Picture-in-Picture)
mode.
To connect the two computers to the monitor:
1. Connect one end of the USB Type C cable to the USB Type C port of the monitor.
Then connect the other end of the cable to the USB Type C port of the notebook.
2. Connect one end of a DisplayPort cable to the DisplayPort of the monitor. Then
connect the other end of the cable to the DisplayPort or mini DP of the computer.
3. Connect the USB Type B male cable (square with 2 cut corners) to the USB Type B
port of the monitor. Then connect the other end of the cable to the USB port of
the computer.
NOTE:
• To have a better online gaming experience, and achieve maximum refresh
rates, please use a PC to play.
• Using Type C will have a power charging function, therefore the graphics
card will slow down and downscale the refresh rate to have better
performance.
Type-C
63
Type-C