Datalogic PowerScan PBT9501-AR Quick Reference Manual page 12

Industrial cordless handheld auto range area imager bar code reader
Hide thumbs Also See for PowerScan PBT9501-AR:
Table of Contents

Advertisement

Installing the Battery Pack
CAUTION
CAUTION
As with other types of batteries, Lithium-Ion (LI) batteries will
lose capacity over time. Capacity deterioration is noticeable
after one year of service whether the battery is in use or not.
It is difficult to precisely predict the finite life of a LI battery,
but cell manufacturers rate them at 500 charge cycles. In
other words, the batteries should be expected to take 500 full
discharge / charge cycles before needing replacement. This
number is higher if partial discharging / recharging is adhered
to rather than full / deep discharging.
The typical manufacturer advertised useful life of LI batteries
is one to three years, depending on usage and number of
charges, etc., after which they should be removed from ser-
vice, especially in mission critical applications. Do not con-
tinue to use a battery that is showing excessive loss of
capacity, it should be properly recycled / disposed of and
replaced. For most applications, batteries should be replaced
after one year of service to maintain customer satisfaction
and minimize safety concerns.
Collect and recycle waste batteries separately from the device
in comply with European Directive 2006/66/EC, 2011/65/EU,
2002/96/EC and 2012/19/EU
US and China regulatory and others laws and regulations
about the environment.
4
Always charge the battery at 32° – 104°F (0° - 40°C)
temperature range.
Use only the authorized power supplies, battery pack,
chargers, and docks supplied by your Datalogic
reseller. The use of any other power supplies can dam-
age the device and void your warranty.
Do not disassemble or modify the battery. The battery
contains safety and protection devices, which, if dam-
aged, may cause the battery to generate heat, explode
or ignite.
Do not place the battery in or near fire, on stoves or
other high temperature locations.
Do not place the battery in direct sunlight, or use or
store the battery inside cars in hot weather. Doing so
may cause the battery to generate heat, explode or
ignite. Using the battery in this manner may also
result in a loss of performance and a shortened life
expectancy.
Do not place the battery in microwave ovens, high-
pressure containers or on induction cookware.
Immediately discontinue use of the battery if, while
using, charging or storing the battery, the battery
emits an unusual smell, feels hot, changes color or
shape, or appears abnormal in any other way.
Do not replace the battery pack when the device is
turned on.
Do not remove or damage the battery pack's label.
Do not use the battery pack if it is damaged in any part.
Battery pack usage by children should be supervised.
and
subsequent modifications,
PowerScan™ PBT9501-AR

Advertisement

Table of Contents
loading

Table of Contents