Table of Contents
Advertisement
USER GUIDE
General Installation
LEVELING INFORMATION
NOTICE
Because these units do not have leveling legs,
it is extremely important that they sit on a level
surface. If they are not level, the ice mold will not
fill evenly.
Use a level to confirm the
unit is level. Level should
be placed along top edge
and side edge as shown.
INSTALLATION
1.
Plug in the power/electrical cord.
2.
Gently push the unit into position. Be careful not to
entangle the cord or water line.
3.
Re-check the leveling, from front to back and side to
side. Make any necessary adjustments.
4.
Remove interior packing material and wipe out the
inside of the unit with a clean, water-dampened cloth.
General Installation
10
u-line.com
Advertisement
Table of Contents
Troubleshooting
