4" AMPLIFIED RECESSED CEILING SPEAKERS
8" AMPLIFIED RECESSED CEILING SPEAKERS
INTRODUCTION
These instructions contain the specifications and
guidelines necessary to install, operate and maintain
the Amplified Recessed Ceiling Speakers.
Specifications and installation information for the
mounting rings and backboxes used with these
speakers is also included in this document.
These speakers are for use with any Valcom page
control and are for interior use only.
SPECIFICATIONS
Applications
These Amplified Recessed Ceiling Speakers are used
to provide one-way paging when used with a low
level audio input.
•
Valcom Paging Adapters
•
Electronic Key System Page Ports (interface
adapter may be required)
•
PABX Page Ports (interface adapter may be
required)
•
Stand Alone Systems
•
Existing 70V Paging Systems
•
Background Music Systems
Features
•
Self-contained amplifier and volume control
•
Operates on -24VDC
•
Screw terminals for all connections
•
Grille simulates recessed lighting fixture
•
No visible mounting hardware due to concealed
mounting studs for the speaker and torsion
springs
Nominal Specifications
•
Amplifier Input Impedance
•
Amplifier Input Level
•
Amplifier Output
Technical Manuals Online! - http://www.tech-man.com
100 Ohm nominal
-10dBm nominal
1 watt into 45 Ohm
spkr load
1
firealarmresources.com
Power Requirements
Voltage
Current
Environment
Temperature
Humidity
0 to 85% non-precipitating
Dimensions/Weights
•
V-1011BB - 4" Recessed Ceiling Speaker
w/Backbox
7.8" Dia x 5.0"D (19.81cm Dia. x 12.7cm D)
5.8 lbs. (2.63 kg)
•
V-1011MR - 4" Recessed Ceiling Speaker
w/Mounting Ring
7.8" Dia x 5.0"D (19.81cm Dia. x 12.7cm D)
2.4 lbs. (1.09 kg)
•
V-1012BB - 8" Recessed Ceiling Speaker
w/Backbox
11.75" Dia x 6.0"D
(29.85cm Dia. x 15.24cm D)
6.3 lbs. (2.86 kg)
•
V-1012MR - 8" Recessed Ceiling Speaker
w/Mounting Ring
11.75" Dia x 6.0"D
(29.85cm Dia. x 15.24cm D)
3.3 lbs. (1.50 kg)
VSP-V-1011/V-1012
Issue 5
-24VDC
50mA
0 to 50 degrees C
947019