Sony DHC-AZ1D Operating Instructions Manual page 9

1 Connect the speakers.
Connect the right and left speaker cords to
the SPEAKER jacks as shown below.
Insert only the stripped portion
Gray/Solid (3)
Black/Stripe (#)
2 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
Plug type A
AM loop antenna
Extend the FM lead antenna horizontally
* Strip off an end-portion of wire covering.
Plug type B
AM loop antenna
Extend the FM lead antenna horizontally
* Strip off an end-portion of wire covering.
Insert only the
stripped portion*
Insert only the
stripped portion*
Plug type C
AM loop antenna
Extend the FM lead antenna
horizontally
* Strip off an end-portion of wire covering.
Note
Keep the antennas away from the speaker cords.
3 Connect a TV.
Select one of the following connections.
Connection A (For all models)
If your TV has component video input
jacks, connect your TV to the
COMPONENT VIDEO OUT jacks with a
component video cord (not supplied).
For Russian model, make sure to set
the VIDEO OUT SELECTOR to
COMPONENT.
If your TV is compatible with progressive
format file signals, use this connection and
set "PROGRESSIVE." For details, see "To
change the type of signal output from the
system" (page 23).
VIDEO OUT SELECTOR*
* Russian model only
Insert only the
stripped portion*
continued
GB
9