Table of Contents
Advertisement
Assembly Instructions
1
8
DO NOT RETURN TO PLACE OF
PURCHASE
Assembly Tips:
1. Select an area where you will assemble this
product. To protect components, choose a smooth
surface that's free of cracks or openings.
2. Spread out all parts.
3. Tighten all hardware connections by hand first.
Then, before completing each step, go back and
fully tighten all hardware. Be careful not to over-
tighten. That could damage surfaces or strip
threads.
4. For best results, complete each step in the order
presented.
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to
make the solution are included in the "Operating
Instructions" section of this manual) (not included).
• (1) precision-filled gas cylinder between 11kg and
15kg. Your barbecue will perform better if propane
or LPG mixtures are used. (not included).
Typical assembly is approximately one hour.
3
Attach Right Cart Frame
B
x 8
B
2
Attach Upper Cart Frames, Leg
Connectors and Legs
4
Attach Bottom Grid
B
x 4
Right Leg
B
Advertisement
Table of Contents
