Frequently Asked Questions - VTech CS6719-27 User Manual

Quiet mode
off
Quiet mode
on
Registering...
Ringer muted
Ringer off
Saved
Speaker
To register
HS...
...see manual
Transferred
Unable to
call
XX missed
calls
** Paging **
The quiet mode is
turned off.
The quiet mode is
turned on.
The handset
registration is in
progress.
The handset ringer
is muted temporarily
during an incoming
call.
The handset ringer is
turned off.
Your selection has
been saved.
The handset
speakerphone is in
use.
Screen display on
a non-registered
handset.
You have transferred
an outside call to
another cordless
handset.
The handset is out of
range while on a call.
Failed phone call (the
telephone line is in
use).
Failed intercom call
(there are already two
handsets being used).
There are new calls in
the caller ID log.
All system handsets are
being paged.

Frequently asked questions

Below are the questions most frequently
asked about the cordless telephone.
If you cannot find the answer to your
question, visit our website at
www.vtechphones.com or call
1 (800) 595-9511 for customer service.
My telephone
does not work
at all.
The display
shows No line.
I cannot hear
the dial tone.
25
Make sure the telephone
base is installed properly,
and battery is installed
and charged correctly.
For optimum daily
performance, return the
handset to the telephone
base after use.
Disconnect the telephone
line cord from your
telephone and connect it
to another telephone. If
there is no dial tone on that
other telephone either,
then the telephone line
cord may be defective. Try
installing a new telephone
line cord.
If changing telephone line
cord does not help, the
wall jack (or the wiring to
this wall jack) may be
defective. Contact your
telephone service provider.
You may be using a new
cable or VoIP service, the
existing telephone jacks in
your home may no longer
work. Contact your service
provider for solutions.