Table of Contents
Advertisement
I cannot dial
Make sure there is a dial
out.
tone before dialing. It
is normal if the handset
takes a second or two
to synchronize with the
telephone base before
producing a dial tone. Wait
an extra second before
dialing.
Eliminate any background
noise. Mute the handset
before dialing, or dial from
another room in your home
with less background
noise.
The display
The handset is
shows To
deregistered from the
telephone base.
register
HS... and
Place the handset in the
...see manual
telephone base to register
alternately.
it back. The handset shows
The handset
Registered and you hear a
does not work
beep when the registration
at all.
process completes. This
process takes about 90
seconds to complete.
The display
Place the handset in the
shows Low
telephone base or charger
battery.
for charging.
The battery
Make sure the handset is
does not
placed in the telephone
charge in the
base or charger correctly.
handset or
If the battery is completely
the handset
depleted, charge the
battery does
battery for at least 30
not accept
minutes before use.
charge.
You may need to purchase
a new battery.
The telephone
Make sure the ringer volume
does not ring
is not set to off.
when there is
The handset may be too
an incoming
far from the telephone
call.
base. Move it closer to the
telephone base.
My handset
beeps
and is not
performing
normally.
I hear other
calls when
using the
telephone.
I hear noise on
the cordless
handset and
the keys do
not work.
26
Move the handset closer to
the telephone base. It may
be out of range.
Disconnect the telephone
base from the telephone
wall jack. Plug in a different
telephone. If you still hear
other calls, the problem is
probably in the wiring or
telephone service. Contact
your telephone service
provider.
Make sure the telephone
line cord is plugged in
securely.
Advertisement
Table of Contents
