Installation; Power Connection - Wharfedale Pro SW-10 User Manual

INTRODUCTION
The SW-10 & SW-12 & SW-15 is the latest in a long line of distinguished Wharfedale active subwoofers. These technologically advanced
subwoofers will complement the finest electronics and decor.
Please read these instructions carefully before installing your subwoofers. A few minutes studying this manual will ensure superb
performance from your subwoofer for many years.

INSTALLATION

Unpacking
Carefully unpack each subwoofer.
Retain all the packing materials so that your subwoofer can be repacked and shipped without damage.
If you dispose of the packing, do so with regard to all recycling provisions in your area.

Power Connection

This subwoofer is set to operate for the mains voltage marked on the amplifier panel. Before connecting check that this voltage
is correct for your mains supply.
If you move to an area with a different mains supply voltage, please consult your Wharfedale dealer to arrange the conversion of this
product.
Positioning the Subwoofer
Although the unit may be placed almost anywhere in the room, we recommend that it be placed in front of the listener and as central
to the listening position as possible. There should be a mains outlet within easy reach. The subwoofer should not be operated within
450mm of a television set as the drive unit magnet may distort the picture. Remember that there should be a line of sight between the
listening position and the front of the subwoofer otherwise the handset remote functions will not be operable.
We suggest you initially position the subwoofer about 20cm (8 inches) from the wall. Placing the unit close to the wall will enhance the
bass; placing it across the corner of the room will increase the bass further, possibly at the expense of clarity. Do not place the subwoofer
close to surfaces or objects that may rattle. The floor under the subwoofer should be sound with no loose floorboards, etc. Experiment
with locations and sources before making a final decision.
Multi-Channel Room Placement
The diagram shows the Dolby Labs recommended positions for multi-channel operation. For 5.1 channel operation use the satellites in
the front and surround positions with the Subwoofer in the LFE position.
If you have a 7.1 channel processor/amplifier you can enhance the system further by buying one of the larger loudspeakers from the
Wharfedale range to use as front channel speakers and use the satellite units as back channels.
If you have any queries, your wharfedale dealer will be pleased to advise you.
SW10&12&15 manual-A4.indd 1
USER INSTRUCTIONS: SW-10 & SW-12 & SW-15 SUBWOOFER

2017-8-22 16:31:35