Panasonic TH-86EQ2W Operating Instructions Manual page 26

■
When the Unit is turned on for the first time
Following screen will be displayed.
1
Select the language with
press <ENTER>.
OSD language
English (UK)
Deutsch
Français
Español
ENGLISH (US)
Русский
2
For vertical installation, select
[Portrait] with
<ENTER>.
Display orientation
Landscape
Note
●
Once the items are set, the screens won't be
displayed when switching on the unit next time.
Each item can be reset in the following menus.
[OSD language]
[Display orientation]
3
Configure the network account setting
as necessary.
Administrator account settings
Password policy
User name
Password
Save
Skip
Please set the user name and password.If not set,
could not use the Web Control function and for communication
control via a LAN (including Panasonic application software).
Password policy
Cautions regarding the password setting in this item
are displayed on another window.
Password policy
·Reusing passwords is not recommended.
·Password cannot be blank.
·A password consisting of at least eight half-width characters and contaning
characters of at least three of the following four types is recommended.
·Uppercase letters
·Lowercase letters
·Digits
·Symbols (~!@#$%^&*()_+|}{][<>.,/?`)
26
English
Italiano
and press
Portrait
dispadmin
User name
A keyboard for user name setting is displayed. Enter
the user name.
and
Password
A keyboard for password setting is displayed. After
the password is entered, select [Ok] to display a
confirmation screen. Enter the password again and
select [Ok] to determine the password.
Save
The user name and password set above are saved
in the display unit.
Skip
Exits this screen without configuring this setting.
Note
● Once set or skipped, this screen won't be displayed
when switching on the unit next time. Use the following
menu to configure the setting again.
[Network settings]
■
Power ON message
The following message may be displayed when turning
the unit power ON:
No activity power off Precautions
When [No activity power off] in the [Setup] menu is set to
[Enable], a warning message is displayed every time the
power is turned ON.
"Power management" information
Last turn off due to 'Power management'.
When "Power management" is functioned, an information
message is displayed every time the power is turned ON.
COLOUR DESIGN Information
Colour design settings are universal.
The information is displayed when [Setup] - [Colour design
settings] - [Colour design] is set to [Universal].
These message displays can be set with the following
menu:
●
[Power on settings] menu
Information(No activity power off)
Information(Power management)
Information(Colour design)
'No activity power off' is enabled.